Driver's Outer Dashboard Trim Removal / Installation

Driver's Outer Dashboard Trim Removal/Installation

Special Tools Required

- KTC Trim Tool Set SOJATP2014
*

NOTE:

- Take care not to scratch the dashboard or the related parts.
- Use the appropriate tool from the KTC trim tool set to avoid damage when removing components.

1. Remove the driver's outer dashboard trim (A).

1. Pry up on the edge of the trim with the appropriate trim tool at the steering column side.

2. Detach the clips.





2. Install the trim in the reverse order of removal, and note these items:

- If the clips are damaged or stress-whitened, replace them with new ones.
- Push the clips into place securely.