Passenger's Dashboard Undercover Removal / Installation

Passenger's Dashboard Undercover Removal/Installation

Special Tools Required

- KTC Trim Tool Set SOJATP2014
*

NOTE:

- Take care not to scratch the dashboard or the related parts.
- Use the appropriate tool from the KTC trim tool set to avoid damage when removing components.

1. Remove the passenger's dashboard undercover (A).

1. Gently pull down the undercover to detach the clips.

2. Pull away the undercover to release the pins (B) from the holders (C).





2. Install the undercover in the reverse order of removal, and note these items:

- If the clips are damaged or stress-whitened, replace them with new ones.
- Make sure the pins of the undercover are installed securely to the holders.
- Push the clips into place securely.