Radiator And A/C Condenser Fan, Motor, And Shroud Removal And Installation

Radiator and A/C Condenser Fan, Motor, and Shroud Removal and Installation

Removal

1. Do the battery removal procedure.

2. Remove the harness clamps, then remove the battery base.

3. Remove the front grille cover Front Grille Cover Replacement.

4. Remove the water separator (A) and the intake air duct (B).






5. Remove the coolant reservoir.






6. Disconnect the fan motor connectors (A), then remove the harness clamp (B).






7. Remove the A/C condenser fan shroud assembly (A), then remove the radiator fan shroud assembly (B).

NOTE: Pull-up the radiator, then move the radiator fan shroud assembly toward the right side of the vehicle to allow for enough space to lift it up and away from the A/C condenser fan shroud assembly.






8. Disassemble the fan shrouds.






Installation

1. Reassemble the fan shrouds.






2. Install the radiator fan shroud assembly (A), then install the A/C condenser fan shroud assembly (B).






3. Connect the fan motor connectors (A), then install the harness clamp (B).






4. Install the coolant reservoir.






5. Install the water separator (A) and the intake air duct (B).





6. Install the front grille cover Front Grille Cover Replacement.

7. Install the battery base, then install the harness clamps.

8. Do the battery installation procedure.