Water Outlet Removal/Installation

Water Outlet Removal and Installation

1. Drain the engine coolant Service and Repair.

2. Disconnect the breather pipe (A), then remove the intake air duct (B).






3. Disconnect the upper radiator hose (A), the heater hose (B), and the water bypass hose (C).





4. Disconnect the water bypass hose (D).

5. Remove the intake manifold.

6. Remove the connecting pipe mounting bolts (A), then remove the connecting pipe (B).






7. Disconnect the ECT sensor 1 connector (A), then remove the water outlet (B).





8. Install the water outlet with a new O-ring (C).

9. Install the other parts in the reverse order of removal.

10. Refill the radiator with engine coolant, and bleed the air from the cooling system Service and Repair.

11. Clean up any spilled engine coolant.