Side Engine Mount Removal/Installation

Side Engine Mount Removal and Installation

Removal

1. Remove the power steering fluid reservoir (A) from the bracket (B).






2. Lift and support the engine with a jack and a wood block under the oil pan.

3. Remove the ground cable (A), then remove the upper half of the side engine mount bracket (B).






4. Remove the side engine mount (A).






Installation

1. Install the side engine mount (A) using new bolts (B).






2. Loosely install the upper half of the side engine mount bracket (A) using new side engine mount bracket mounting bolts and the side engine mount mounting bolt.





3. Install the ground cable (B).

4. Remove the jack and the wood block.

5. Tighten the mounting bolts in the numbered sequence shown.

6. Install the power steering fluid reservoir (A) to the bracket (B).