Accessory Power Socket Trim Removal / Installation

Accessory Power Socket Trim Removal/Installation

Special Tools Required

- KTC Trim Tool Set SOJATP2014
*

NOTE:

- Take care not to scratch the center console or the related parts.
- Use the appropriate tool from the KTC trim tool set to avoid damage when removing components.

1. Remove the center console Center Console Removal / Installation.

2. From under the console, disconnect the USB main harness connector (A), and remove the screws.






3. Open the console armrest, and release the hook (A), then remove the accessory power socket trim (B).






4. Install the trim in the reverse order of removal, and make sure the connector is plugged in properly.