Rear Lower Arm A Replacement

Rear Lower Arm A Replacement

1. Raise and support the vehicle Service and Repair.

2. Remove the rear wheel.

3. Remove the parking brake cable mounting bolt (B).





4. Remove the lower arm A mounting bolts, then remove lower arm A.

NOTE: Use new mounting bolts during reassembly.

5. Install lower arm A in the reverse order of removal, and note these items:

- First install all of the components, and lightly tighten the bolts, then raise the suspension to load it with the vehicle's weight before fully tightening to the specified torque.
- Before installing the wheel, clean the mating surfaces between the brake disc/drum and the inside of the wheel.

6. Check the wheel alignment, and adjust it if necessary Service and Repair.