A/T Gear Position Indicator Panel Base Assembly Replacement

A/T Gear Position Indicator Panel Base Assembly Replacement

1. Remove the shift lever assembly Shift Lever Removal.

2. Remove the shift lever knob A/T Shift Lever Knob Replacement.

3. Release the lock tabs (A) of the A/T gear position indicator panel base.






4. Remove the A/T gear position indicator panel light socket (A) from the indicator panel (B), then remove the indicator panel.






5. Remove the A/T gear position indicator panel light harness from the harness guides.

6. Release the lock tabs (A) of the A/T gear position indicator panel base.






7. Remove the A/T gear position indicator panel base.






8. Remove the select cover (A), then replace the A/T gear position indicator panel base.






9. Install the select cover on the A/T gear position indicator panel base.

10. Install the A/T gear position indicator panel base (A), then route the harnesses as shown. Take the slack out of the harnesses.






11. Install the indicator panel light socket (A).






12. Install the indicator panel (B) while aligning the pins (C) with the positioning holes (D) of the indicator panel base (E).

13. Install the shift lever knob A/T Shift Lever Knob Replacement.

14. Install the shift lever assembly Shift Lever Installation.