104-11

VSA DTC Troubleshooting: 104-11

DTC 104-11:

Yaw Rate-Acceleration Sensor Internal Circuit Malfunction

NOTE: Before you troubleshoot, record all freeze data and any on-board snapshot, and review the general troubleshooting information How To Troubleshoot The VSA System.

1. Turn the ignition switch to ON (II).

2. Clear the DTC with the HDS.

3. Turn the ignition switch to LOCK (0) and then back to ON (II).

4. Check for DTCs with the HDS.

Is DTC 104-11 indicated?

YES -

Replace the yaw rate-lateral acceleration sensor Service and Repair.

NO -

Intermittent failure, the system is OK at this time. Refer to intermittent failures troubleshooting.