VSA System

VSA DTC Troubleshooting: 25-13, 26-13

DTC 25-13:

Yaw Rate Sensor Output Signal Malfunction

DTC 26-13:

Lateral Acceleration Sensor Output Signal Malfunction

NOTE: Before you troubleshoot, record all freeze data and any on-board snapshot, and review the general troubleshooting information How To Troubleshoot The VSA System.

1. Turn the ignition switch to ON (II).

2. Clear the DTC with the HDS.

3. Turn the ignition switch to LOCK (0).

4. Test-drive the vehicle at 9 mph(15 km/h) or more.

NOTE: Drive the vehicle on the road, not on a lift.

5. Check for DTCs with the HDS.

Is DTC 25-13 or 26-13 indicated?

YES -

Replace the yaw rate-lateral acceleration sensor Service and Repair.

NO -

Intermittent failure, the system is OK at this time. Refer to intermittent failures troubleshooting.