Manufacturer Code Charts: 2702

Navigation System DTC Troubleshooting: 2702

DTC 2702:

GPS Diag: Receiver in Navi ECU

NOTE:

- Check the vehicle battery condition first Battery Test.
- Before you troubleshoot, make sure to follow the general troubleshooting information Reading and Clearing Diagnostic Trouble Codes.
- This navigation DTC sets when a problem is detected in the internal GPS receiver.
- Check any official Honda service website for more service information about the navigation system.

1. Clear the hard error code.

2. Turn the ignition switch to LOCK (0), and then back to ON (II).

3. Check for the hard error code.

Is DTC 2702 indicated?

YES -

Replace the audio-navigation unit Audio-Navigation Unit Removal/Installation (With Navigation).

NO -

Intermittent failure, the system is OK at this time.