Fuel Door: Service and Repair

Fuel Fill Door Adapter Replacement

NOTE:

- Put on gloves to protect your hands.
- Take care not to scratch the body.

1. Remove the fuel pipe protector Fuel Pipe Protector Replacement.

2. Remove the fuel cap (A) by turning it counterclockwise, and remove the fuel cap retainer strap (B) from the hinge arm (C). Remove the screw.






3. Remove the bolts, and lower the fuel filler pipe (A).






4. Pull the fuel fill door/adapter lip (A) out from the fuel filler pipe (B).






5. Hold the fuel fill door partly open, and pull out the fuel fill door/adapter (A) while rotating it 90 ° clockwise.






6. Remove the fuel fill door/adapter (A).

1. Pull the lower portion of the fuel fill door/adapter out.

2. Pull out the fuel fill door/adapter hinge (B) through the hole in the body.

3. If necessary, release the hooks (C), then remove the fuel fill door push lifter (D) from the fuel fill door/adapter.





7. If necessary, pull out the fuel fill adapter grommet (A).






8. Install the fuel fill door adapter in the reverse order of removal, and make sure the adapter lip (A) is fully seated on the fuel filler pipe (B).