Dashboard Center Lower Cover Removal/Installation

Dashboard Center Lower Cover Removal/Installation

Special Tools Required

- KTC Trim Tool Set SOJATP2014
*

NOTE:

- Take care not to scratch the dashboard or its related parts.
- Use the appropriate tool from the KTC trim tool set to avoid damage when removing components.

1. Remove the dashboard center lower cover (A).

1. Apply protective tape to the dashboard center lower trim (B) beside the bottom edge of the dashboard center lower cover.

2. Pry the bottom side of the cover partially out with the appropriate trim tool, then detach the clips.

3. Pull the cover down to release the hooks (C), then remove it.

4. '12 model: Remove the console box light (D).





2. Install the cover in the reverse order of removal, and note these items:

- If the clips are damaged or stress-whitened, replace them with new ones.
- Push the clips and the hooks into place securely.