Interior Trim Removal/Installation - Cargo Area

Interior Trim Removal/Installation - Cargo Area

Special Tools Required

- KTC Trim Tool Set SOJATP2014
*

NOTE:

- Put on gloves to protect your hands.
- Take care not to bend or scratch the trim and panels.
- Use the appropriate tool from the KTC trim tool set to avoid damage when removing components.

1. Release the hooks (A), then pull up the cargo floor (B) and remove it.

Without spare tire





With spare tire





2. Release the bungee (C).

3. Remove the tailgate weatherstrip, as needed Service and Repair.

4. With temporary repair kit (TRK): Remove the cargo floor box (A)






5. Remove the rear trim panel (A).

1. Disengage the tabs (B) and hooks (C) on both sides from both cargo area side trim panel (D).

2. Detach the clips by pulling the panel up.





6. Install the trim in the reverse order of removal, and note these items:

- If the clips are damaged or stress-whitened, replace them with new ones.
- Push the clips, the hooks, and the tabs into place securely.