A-Pillar Corner Trim Replacement

A-Pillar Corner Trim Replacement

Special Tools Required

- KTC Trim Tool Set SOJATP2014
*

NOTE:

- Put on gloves to protect your hands.
- Take care not to scratch the corner trim or the body.
- Use the appropriate tool from the KTC trim tool set to avoid damage when removing components.

1. Carefully insert the appropriate trim tool (A) next to the grommet (B), and detach the pin and the grommet together by prying on the A-pillar corner trim (C), then detach the tab (D).

NOTE: Apply protective tape (E) to the body as shown.






2. Slide the A-pillar corner trim forward in the direction shown, and detach the clips (A) and the tab (B) from the body, then remove the trim.





3. Install the trim in the reverse order of removal, and note these items:

- If the clips are damaged or stress-whitened, replace them with new ones.
- Push the clips into place securely.