Rear Seat-Back Cover/Pad Replacement

Rear Seat-Back Cover/Pad Replacement

Special Tools Required

- KTC Trim Tool Set SOJATP2014
*

NOTE:

- Use the appropriate tool from the KTC trim tool set to avoid damage when removing components.
- Take care not to tear or damage the seat covers.
- Put on gloves to protect your hands.
- The left rear seat is shown, the right rear seat is similar.

1. Remove the rear seat assembly Rear Seat Removal/Installation.

2. Remove the seat-back Rear Seat Disassembly/Reassembly.

3. Remove the these items:

- Latch cover
- Striker hole cover

4. Release the hooks (A), then remove the tether anchor cover (B).






5. Release the hook strip (A), and unzip the seat-back cover and pull back the cover (B).






6. Release the hooks (A) from the seat-back frame (B).






7. Pull out the seat-back cover/pad (A) from the frame. Pinch the tabs on the end of the head restraint guides (B, C), and remove the guides from the seat-back.

'9-10 models





'11-12 models





8. Release the hooks (A) from the seat-back frame (B).






9. Remove the seat-back cover/pad (A) and the silencer (B) from the seat-back frame (C). If necessary, release the hooks (D) and remove the latch lever inner cover (E).





10. Install the seat-back cover/pad in the reverse order of removal. To prevent wrinkles when installing the seat-back cover, make sure the material is stretched evenly over the pad before securing the hooks.