Rocker Arm And Shaft Disassembly/Reassembly

Rocker Arm and Shaft Disassembly/Reassembly

NOTE:

- Identify each part as it is removed so that each item can be reinstalled in its original location.
- Inspect the rocker arm shaft and the rocker arms Rocker Arm And Shaft Inspection.
- If reused, the rocker arms must be installed in the their original locations.
- Remove the rocker shaft bolt before removing the rocker shaft from the rocker shaft holder bridge.
- Prior to reassembling, clean all the parts in solvent, dry them, and apply new engine oil to any contact points, the bearing surfaces, and lost motions.
- When replacing the rocker arm assembly, remove the fastening hardware from the new rocker arm assembly.