Fuel Filler Hose: Service and Repair

Fuel Fill Pipe Removal/Installation

1. Relieve the fuel pressure Service and Repair.

2. Drain the fuel tank Service and Repair.

3. Remove the fuel fill cap.

4. Remove the left rear wheel.

5. Remove the fuel fill pipe cover (A).





6. Raise the vehicle on a lift Service and Repair.

7. Remove the tank mount bracket (A).






8. Disconnect the fuel fill hose (A), and the quick-connect fitting (fuel suction tube) (B).






9. Remove the quick-connect fittings (A) Fuel Line/Quick-Connect Fitting Removal. Remove the clamp (B), then remove the non-return valve tube from the fuel fill pipe.






10. Remove the bolts (A).






11. Remove the fuel fill pipes (A).





12. Install the parts in the reverse order of removal.

NOTE: Before connecting the fuel fill pipe and the quick-connect fitting, check for dirt, and clean it if needed, taking care not to damage the fuel fill pipe and other parts.