Torque Converter Housing Main shaft Bearing And Oil Seal Replacement

Torque Converter Housing Mainshaft Bearing and Oil Seal Replacement

Special Tools Required

- Adjustable Bearing Puller, 25-40 mm 07736-A01000B
- Driver Handle, 15 x 135L 07749-0010000
- Bearing Driver Attachment, 62 x 68 mm 07746-0010500
- Bearing Driver Attachment, 72 x 75 mm 07746-0010600

1. Remove the mainshaft bearing and oil seal using the adjustable bearing puller (20-40 mm) and a commercially available 3/8''-16 slide hammer (A).






2. Install the new mainshaft bearing until it bottoms in the torque converter housing using the driver handle and the bearing driver attachment (62 x 68 mm).






3. Install the new oil seal flush with the housing using the driver handle and the bearing driver attachment (72 x 75 mm).