Transmission End Cover Idler Gear Shaft Bearing Replacement (A/T)

Transmission End Cover Idler Gear Shaft Bearing Replacement

Special Tools Required

- Adjustable Bearing Puller, 25-40 mm 07736-A01000B
- Driver Handle, 15 x 135L 07749-0010000
- Bearing Driver Attachment, 52 x 55 mm 07746-0010400

1. Remove the idler gear shaft bearing from the end cover using the adjustable bearing puller (20-40 mm) and a commercially available 3/8''-16 slide hammer (A).






2. Install the new bearing in the end cover using the driver handle and the bearing driver attachment (52 x 55 mm).