Auxiliary Power Outlet: Service and Repair

Cigar Lighter Housing or 12 Volt Accessory Power Receptacle Replacement

Tools Required



J 42059 Cigar Lighter Socket Remover


Removal Procedure

Caution: Refer toBattery Disconnect Caution in Cautions and Notices.
1. Disconnect the negative battery cable.




2. Lift up the front cover of the power socket or remove cigarette lighter.




3. Insert theJ 42059 into the socket sleeve. Tilt the tool so that the tool fits into the slots on the sides of the socket sleeve.




4. Hold the plastic ring in place. Pull the socket gently out of the assembly in order to remove the outlet.




5. Remove the electrical connector from the socket.



Installation Procedure





1. Connect the electrical connectors to the socket.




2. Insert the plastic ring into the opening and snap the plastic ring into place.
3. Insert the socket through the plastic ring and gently turn, by hand, until the socket ring is sealed.




4. Close socket covers and/or insert cigarette lighter.
5. Connect the negative battery cable and check for operation.