Instrument Panel Module Replacement

INFLATABLE RESTRAINT INSTRUMENT PANEL MODULE REPLACEMENT

REMOVAL PROCEDURE




1. Remove trim panel replacement - I/P accessory right - from the I/P substraight (1).

CAUTION:
- Refer to SIR Caution in Service Precautions.
- Refer to SIR Inflator Module Handling and Storage Caution in Service Precautions.

2. Disable the SIR system (2).
3. Remove the connector from the I/P.




4. Remove the inflatable restraint I/P module retaining bolts.
5. Ensure that you keep a firm hold on the I/P module.

INSTALLATION PROCEDURE




1. Install the inflatable restraint I/P module (1) to the mounting bracket through the front of the instrument panel.

NOTE: Refer to Fastener Notice in Service Precautions.

2. Install the fasteners (2) to the inflatable restraint I/P module.

Tighten
Tighten the fasteners to 10 N.m (89 lb in).

3. Enable the SIR system.
4. Install the yellow connector to the I/P.
5. Install the trim panel to the substraight.