Grille Guard/Brush Guard Replacement (Base)

Grille Guard/Brush Guard Replacement (Base)

Removal Procedure





1. Remove the lower grille. Refer toLower Grille Replacement (Lower Grille Replacement) .
2. Remove the bolt from the pencil brace at the hood support, if equipped.
3. Remove the bolts retaining the brush guard to the vehicle.
4. Remove the brush guard from the vehicle.



Installation Procedure





1. Install the brush guard to the vehicle.

Notice: Refer to Fastener Notice Service Precautions .

2. Install the bolts retaining the brush guard to the vehicle.

Tighten the bolts to 50 Nm (37 lb ft).

3. Install the bolt to the pencil brace at the hood support, if equipped.

Tighten the bolt to 24 Nm (18 lb ft).

4. Install the lower grille. Refer toLower Grille Replacement (Lower Grille Replacement) .