Instrument Panel Bulb: Service and Repair

INSTRUMENT PANEL (I/P) LAMP REPLACEMENT

REMOVAL PROCEDURE

IMPORTANT: This procedure calls for the replacement of incandescent bulbs only. The light emitting Diodes (LED's) are not replaceable individually. If LED replacement is needed, send the cluster to an AC Delco service center. Refer to Instrument Panel Cluster (IPC) Replacement in instrument Panel, Gages and Console.




1. Remove the instrument panel cluster.
2. Unclip the IPC rear cover plate by prying gently on the tabs with a screwdriver.




3. Remove rear cover plate from the IPC.
4. Remove the bulb and base assembly by turning clockwise and pulling outward.

INSTALLATION PROCEDURE




1. Install the bulb to the base.




2. Install the bulb and base assembly into the IPC by turning the bulb 1/2 turn clockwise.
3. Carefully snap the rear cover plate to the IPC.
4. Install the IPC.