License Plate Lamp: Service and Repair

LICENSE LAMP REPLACEMENT

REMOVAL PROCEDURE




1. Remove the screws from the license pocket bezel.
2. Remove the bezel and the lamp.
3. Disconnect the electrical connector.
4. Remove the screw from the lamp.
5. Remove the lamp from the vehicle.
6. Remove the bulb socket from the lamp.
7. Remove the bulb.

INSTALLATION PROCEDURE




1. Install the bulb to the socket.
2. Install the bulb socket to the lamp.
3. Install the lamp to the vehicle.

NOTE: Refer to Fastener Notice in Service Precautions.

4. Install the screws to the lamp.

Tighten
Tighten the screws to 3 N.m (26 lb in).

5. Connect the electrical connector.
6. Install the bezel and lamp to the license plate pocket.
7. Install the screws to the license pocket bezel.

Tighten
Tighten the screws to 3 N.m (26 lb in).