Headlamp Switch: Service and Repair

HEADLAMP SWITCH REPLACEMENT

REMOVAL PROCEDURE




1. Remove the instrument panel trim plate.




2. Pull out the headlamp switch in order to release the clips.




3. Remove the headlamp switch.
4. Disconnect the electrical connector.

INSTALLATION PROCEDURE




1. Connect the electrical connectors to the headlamp switch.




2. Align and install the headlamp switch to the instrument panel.

NOTE: Refer to Fastener Notice in Service Precautions.




3. Install the instrument panel trim plate and fasten to the I/P.

Tighten
Tighten bolts/screws to 2 N.m (18 lb in).