Tail/Turn Signal Lamp Replacement

TAIL/TURN SIGNAL LAMP REPLACEMENT

REMOVAL PROCEDURE




1. Remove the screws from the lamp.
2. Remove the lamp from the body.
3. Disconnect the electrical harness at the connector.
4. Turn the bulb socket counterclockwise.
5. Remove the bulb from the socket.

INSTALLATION PROCEDURE




1. Install the bulb to the socket.
2. Turn the bulb socket clockwise in order to lock.
3. Connect the electrical harness at the connector.
4. Install the lamp to the body.

NOTE: Refer to Fastener Notice in Service Precautions.

5. Install the screws to the lamp.

Tighten
Tighten the screws to 6 N.m (53 lb in).