Glove Box Lamp Switch: Service and Repair

INSTRUMENT PANEL (I/P) COMPARTMENT LAMP SWITCH REPLACEMENT

REMOVAL PROCEDURE




1. Ensure that the headlamp switch is in the OFF position
2. Lower the I/P storage compartment door by pressing the tab.
3. Depress the switch plunger.
4. Pull the switch assembly downward from the retainer.




5. Disconnect the electrical connector (1) from the I/P compartment lamp switch.
6. Remove the I/P compartment lamp switch (2).

INSTALLATION PROCEDURE




1. Connect the electrical connector (1) to the I/P compartment lamp switch.
2. Depress the switch plunger (2).
3. Slide the assembly upward into the retainer.
4. Close the instrument panel storage compartment.