Rear Side Door Window Channel Replacement

Rear Side Door Window Channel Replacement

Removal Procedure

1. Raise the window to the full up position.
2. Remove the door trim panel. Refer to Rear Side Door Trim Panel Replacement (Rear Side Door Trim Panel Replacement) .
3. Remove the water deflector. Refer to Rear Side Door Water Deflector Replacement (Rear Side Door Water Deflector Replacement) .




4. Remove the 2 fasteners (1) retaining the run channel to the door.
5. Remove the run channel.



Installation Procedure

1. With the window in the full up position, position the run channel (2) in place inside the door.

Notice: Refer to Fastener Notice in Cautions and Notices.

2. Install the fasteners (1) retaining the run channel to the door.

Tighten the fasteners to 9 Nm (6 lb ft).





3. Install the water deflector. Refer to Rear Side Door Water Deflector Replacement (Rear Side Door Water Deflector Replacement) .
4. Install the door trim panel. Refer to Front Side Door Trim Panel Replacement (Front Side Door Trim Panel Replacement) .