Wiper Arm Replacement

WIPER ARM REPLACEMENT

REMOVAL PROCEDURES

IMPORTANT: Note the location of the wiper on the glass.




1. Lift the wiper arm (1) and raise approximately 2 inches from the glass.
2. Release the locking tab at the base of the wiper arm (2) by sliding the tab outwards with a flat bladed tool.
3. With a flat-bladed tool, slide the wiper arm off of the post (3).

INSTALLATION PROCEDURE




1. Align the key on the wiper arm with the detent on the wiper arm post (3), and with the locking tab in the open position, slide the wiper arm (2) onto the post.
2. Inspect the wiper arm is fully seated to ensure the locking tab is fully engaged.