Front Floor Console

SPEAKER REPLACEMENT - FRONT FLOOR CONSOLE

REMOVAL PROCEDURE




1. Remove the center console from the vehicle.
2. Remove the instrument panel (I/P) compartment.
3. Remove the passengers I/P extension trim panel.
4. Remove the fasteners retaining the speaker housing to the body.




5. Partially remove the front speaker assembly from the I/P carrier.
6. Disconnect the electrical connector.




7. Remove the clips from front speaker assembly to expose speaker.

INSTALLATION PROCEDURE




1. Install the retainer clips to the speaker housing.

NOTE: Refer to Fastener Notice in Service Precautions.

IMPORTANT: Do not exceed torque specification over tightening of the screws will result in the stud breaking from the front floor console.

Tighten the screws to 9 N.m (80 lb in).




2. Install the front speaker assembly woofer to the I/P carrier.
3. Install the fasteners.

Tighten the screws 9 N.m (80 lb in).

4. Install the exterior trim panel.
5. Install the I/P compartment.