Front Door Striker: Service and Repair

Striker Replacement - Door

Removal Procedure

1. Mark the striker position with a grease pencil prior to removal, to retain proper alignment.
2. Open the door.




3. Remove the fasteners retaining the striker to the door frame.
4. Remove the striker.



Installation Procedure





1. Align the striker with the alignment marks made with the grease pencil.

Notice: Refer to Fastener Notice in Cautions and Notices.

2. Install the fasteners retaining the striker to the door frame.

Tighten the fasteners to 27 Nm (20 lb ft).

3. Operate the door to check for proper operation and alignment.