Body - Revised Endgate Adjustment Procedure
Bulletin No.: 06-08-66-002Date: February 15, 2006
SERVICE MANUAL UPDATE
Subject:
Revised Endgate Adjustment Procedure
Models:
2003-2006 HUMMER H2
This bulletin is being issued to revise Step 2 of the Endgate Adjustment procedure in the Body Rear End sub-section of the Service Manual. Please replace the current information in the Service Manual with the following information.
The following information has been updated within SI. If you are using a paper version of this Service Manual, please make a reference to this bulletin on the affected page.
The English specification has been revised in Step 2 as follows:
2. Adjust the liftgate (1) to the rear bumper fascia (2) gap (A) to 22-24 mm (0.86 in-0.94 in).
Disclaimer