Switch Replacement - Door Lock and Side Window - Passenger

SWITCH REPLACEMENT - DOOR LOCK AND SIDE WINDOW - PASSENGER

REMOVAL PROCEDURE




1. Use a suitable flat-bladed tool to remove the door lock and side window switch from the door panel.
2. Disconnect the electrical connector from the switch.

INSTALLATION PROCEDURE




1. Connect the electrical connector to the door lock and side window switch.
2. Align the switch with the opening in the door panel. Press to seat the switch.
3. Program the keyless entry transmitters if the module has been replaced. Refer to Transmitter Programming .
4. Refer to Control Module References for programming and setup information.