Tires/Wheels - Spare Tire Carrier Bolt Corroded
Bulletin No.: 05-03-10-010Date: August 01, 2005
TECHNICAL
Subject:
Corrosion of Bolt and Washer Securing Spare Tire Carrier to Bumper (Replace Bolt and Washer)
Models:
2005 HUMMER H2
Condition
Some customers may comment on corrosion/rust around the bolts and washers that retain the spare tire carrier to the bumper.
Cause
This may be caused by a lack of corrosion protection on the bolt and washer assembly.
Correction
Replace the spare tire carrier bolt and washer assembly. Remove and install one bolt at a time in the order seen in the illustration above.
Tighten
Tighten the bolt and washer assembly to 110 N.m (81 lb ft).
Parts Information
Warranty Information
For vehicles repaired under warranty, use the table.
Disclaimer