Handle Replacement - Instrument Panel (I/P) Compartment

HANDLE REPLACEMENT - INSTRUMENT PANEL (I/P) COMPARTMENT

REMOVAL PROCEDURE




1. Remove compartment door from instrument panel subscript.
2. Place the compartment door on a work bench.




3. Remove the retaining screws to gain access to compartment handle.
4. Remove the compartment handle assembly.

INSTALLATION PROCEDURE
1. Install new handle assembly to compartment door.
2. Ensure the linkage for the top compartment door are all connected before installing the inside panel.
3. Install the inside panel screws.

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten the screws to 1.6 N.m (14 lb in).

4. Inspect the operation of the top compartment door




5. Install the compartment door to the I/P.