Diesel Data: Automotive Repair
Home >> Hummer >> 2005 >> H2 V8-6.0L >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Electronic Throttle Actuator >> Service and Repair

Electronic Throttle Actuator: Service and Repair



THROTTLE ACTUATOR CONTROL (TAC) MODULE REPLACEMENT

REMOVAL PROCEDURE




1. Remove the left hand corner brace from the cowl.
2. Remove the TAC module mounting nuts.
3. Disconnect the TAC module electrical connectors from the TAC module.

INSTALLATION PROCEDURE




1. Connect the TAC module electrical connectors to the TAC module.
2. Install the TAC module onto the studs and install the mounting nuts.

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten the TAC mounting nuts to 9 N.m (80 lb in).

3. Install the left hand corner brace.

Tighten the corner brace bolts to 25 N.m (18 lb ft).
Diesel-Data.com