Catalyst Shield: Service and Repair

Catalytic Converter Guard Replacement

Removal Procedure

1. Raise and support the vehicle. Refer toLifting and Jacking the Vehicle in General Information.
2. Remove the engine protection shield. Refer toEngine Protection Shield Replacement (Service and Repair) .




3. Remove the mounting bolts.
4. Remove the guard from the vehicle.



Installation Procedure





1. Install the guard to the vehicle.

Notice: Refer toFastener Notice in Cautions and Notices.

2. Install the mounting bolts.

Tighten the bolts to 30 Nm (22 lb ft).

3. Install the engine protection shield. Refer toEngine Protection Shield Replacement (Service and Repair) .
4. Lower the vehicle.