Quick Connect Fitting(s) Service (Plastic Collar)

QUICK CONNECT FITTING(S) SERVICE (PLASTIC COLLAR)

REMOVAL PROCEDURE




1. Relieve the fuel system pressure before servicing any fuel system connection. Refer to Fuel Pressure Relief Procedure.
2. Using compressed air, blow any dirt out of the quick-connect fitting.

CAUTION: Refer to Safety Glasses and Compressed Air Caution in Service Precautions.




3. Squeeze the plastic retainer release tabs.




4. Pull the connection apart.

INSTALLATION PROCEDURE




1. Apply a few drops of clean engine oil to the male fuel pipe end.

CAUTION: Refer to Fuel Pipe Fitting Caution in Service Precautions.




2. Push both sides of the quick-connect fitting together in order to cause the retaining tabs to snap into place.




3. Once installed, pull on both sides of the quick-connect fitting in order to make sure the connection is secure.