Parking Brake Warning Switch: Service and Repair

PARK BRAKE WARNING LAMP SWITCH REPLACEMENT

REMOVAL PROCEDURE

CAUTION: REFER TO BATTERY DISCONNECT CAUTION IN SERVICE PRECAUTIONS.




1. Disconnect the negative battery cable.
2. Remove the MID-Bussed Electrical Center from the bracket.
3. Disconnect the park brake warning lamp switch connector.




4. Remove the park brake warning lamp switch mounting bolt.
5. Remove the park brake warning lamp switch.

INSTALLATION PROCEDURE




1. Install the park brake warning lamp switch.

NOTE: Refer to Fastener Notice in Service Precautions.

2. Install the park brake warning lamp switch mounting bolt.

Tighten
Tighten the bolt to 3 N.m (25 lb in).




3. Connect the park brake warning lamp switch connector.
4. Install the MID-Bussed Electrical Center bracket.
5. Connect the negative battery cable.