Suspension - Revised Shock Absorber Bolt Torque
Bulletin No.: 05-03-09-007Date: May 26, 2005
SERVICE MANUAL UPDATE
Subject:
Revised Shock Absorber Bolt Tightening Specification
Models:
2003-2005 HUMMER H2
This bulletin is being issued to revise the shock absorber tightening specification in the Rear Suspension sub-section of the Service Manual. Please replace the current information in the Service Manual with the following information.
The following information has been updated within SI. If you are using a paper version of this Service Manual, please make a reference to this bulletin on the affected page.
The revised specification is as follows: Shock Absorber Bolts - 115 N.m (85 lb-ft).
Disclaimer