Back Window Motor: Service and Repair

MOTOR ASM REPLACEMENT - MIDGATE WINDOW REGULATOR

REMOVAL PROCEDURE
1. Move the rear seat cushions forward.
2. Fold the seat backs down.




3. Remove the midgate window.
4. Remove the lower window regulator nuts.
5. Remove the upper window regulator nuts.
6. Carefully move the window regulator to one side.
7. Disconnect the electrical connector to the window regulator module.




8. Remove the window regulator assembly from the midgate structure. A slight twisting motion is required for removal.
9. Remove the 4 screws securing the window motor to the regulator assembly.
10. Remove the window motor.

INSTALLATION PROCEDURE
1. Install the new window motor to the window regulator.
2. Install the screws.

NOTE: Refer to Fastener Notice .

Tighten the screws to 6 N.m (53 lb in).




3. Install the window regulator assembly.
4. Reposition the rear seats.
5. Refer to Control Module References for programming and setup information.