Window Run Channel Replacement - Front Door

Window Run Channel Replacement - Front Door

Removal Procedure

1. Raise the window to the full up position.
2. Remove the door trim panel. Refer to Trim Panel Replacement - Side Front Door (Front Side Door Trim Panel Replacement) .
3. Remove the water deflector. Refer to Water Deflector Replacement - Front Door (Front Side Door Water Deflector Replacement) .




4. Remove the 2 fasteners (1) retaining the run channel to the door.
5. Remove the run channel (2).



Installation Procedure

1. Position the run channel (2) in place inside the door.





Notice: Refer to Fastener Notice in Cautions and Notices.

2. Install the fasteners (1) retaining the run channel to the door.

Tighten the fasteners to 9 Nm (7 lb ft).

3. Install water deflector. Refer to Water Deflector Replacement - Front Door (Front Side Door Water Deflector Replacement) .
4. Install the door trim panel. Refer to Trim Panel Replacement - Side Front Door (Front Side Door Trim Panel Replacement) .