Amplifier Replacement

AMPLIFIER REPLACEMENT

REMOVAL PROCEDURE




1. Remove the center console.
2. Remove the amplifier from the amplifier bracket by removing the four screws.
3. Disconnect the electrical connectors from the amplifier.
4. Remove the amplifier from the vehicle.

INSTALLATION PROCEDURE
1. Align the amplifier with the amplifier bracket.
2. Install the amplifier screws.

Tighten the screws to 3.4 N.m (30 lb in).

NOTE: Refer to Fastener Notice in Service Precautions.




3. Connect the electrical connectors to the amplifier.
4. Install the center console to the center console bracket.
5. Inspect the system for proper operation.