Weatherstrip Replacement - Front Door Opening

Weatherstrip Replacement - Front Door Opening

Removal Procedure

1. Open the door.




2. Remove the weatherstrip (2) by pulling the weatherstrip off of the door opening pinch-weld flange (1).



Installation Procedure





1. Starting at the top center of the door opening, install the weatherstrip (2) to the pinch-weld flange (1) and work down the right and left sides towards the bottom center, being careful not to stretch the weatherstrip during installation.
2. Use a rubber mallet to ensure proper seating of the weatherstrip on the pinch-weld flange.
3. Close the door.