Diesel Data: Automotive Repair

Parking Brake Actuator: Service and Repair

PARK BRAKE ACTUATOR REPLACEMENT

CAUTION: REFER TO BRAKE DUST CAUTION IN SERVICE PRECAUTIONS.

Removal Procedure




1. Disable the park brake cable automatic adjuster. Refer to Disabling the Park Brake Cable Automatic Adjuster
2. Raise and support the vehicle. Refer to Vehicle Lifting.
3. Remove the tire and wheel assembly.
4. Remove the rotor.
5. Remove the axle shaft.
6. Remove the park brake shoe.
7. Remove the actuator (2) and rubber boot (1).

Installation Procedure




1. Install the rubber boot (1) and the actuator (2).
2. Install the park brake shoe.
3. Install the axle shaft.
4. Adjust the park brake shoe. Refer to Park Brake Adjustment.
5. Install the rotor.
6. Install the tire and wheel assembly.
7. Remove the safety stands.
8. Lower vehicle.
9. Enable the park brake cable automatic adjuster. Refer to Enabling the Park Brake Cable Automatic Adjuster in Park Brake.