Suspension - Revised Lower Control Arm Replacement
Bulletin No.: 07-03-08-002Date: March 23, 2007
SERVICE MANUAL UPDATE
Subject:
Revised Lower Control Arm Replacement
Models:
2003-2007 HUMMER H2
This bulletin is being issued to revise the Lower Control Arm Replacement procedure in the Front Suspension sub-section of the Service Manual.
Please replace the current information in the Service Manual with the following information.
The following information has been updated within SI. If you are using a paper version of this Service Manual, please make a reference to this bulletin on the affected page.
The front suspension lower control arm-to-frame bolts must be replaced after removal.
The torque specification for the lower control arm-to-frame bolt nuts has been revised to 215 N.m (160 lb ft).
Disclaimer