Steering/Suspension - Idler Arm Grease Fitting
Bulletin No.: 03-00-90-001BDate: January 20, 2006
INFORMATION
Subject:
Recommended Idler Arm Grease Fitting Due to Limited Access
Models:
2003-2006 HUMMER H2
Supercede:
This bulletin is being revised to add model years. Please discard Corporate Bulletin Number 03-00-90-001A (Section 00 - General Information).
The idler arm on the HUMMER H2 has a grease fitting near the top end of the shaft facing the right-hand frame rail. Access to this fitting is very limited and may be accomplished, although not easily, with the use of a 90° grease gun adapter. However, to assure an adequate lubrication at each maintenance interval, it is recommended that the grease fitting be replaced with a 9°0 style fitting, P/N 09417903, pointing upward.
Parts Information
Warranty Information
For vehicles repaired under warranty, use the table.
Disclaimer