Front Fender Liner: Service and Repair

Wheelhouse Panel Replacement


Removal Procedure

1.Remove the wheel. Refer to Tire and Wheel Removal and Installation .

2.Remove the right side air temperature sensors.





1.Remove push-in retainers (1).

2.Remove the wheelhouse panel.

3.Remove the 2 bolts and 3 screws.

Installation Procedure





1.Align the wheelhouse panel to the wheelhouse.

2.Install the right side air temperature sensors.

Notice:Refer to Fastener Notice .

3.Tighten the 2 bolts and 3 screws.

TightenTighten the 2 bolts and 3 screws to 2 N �m (18 lb in).

4.Install push-in retainers (1).

5.Install the wheel. Refer to Tire and Wheel Removal and Installation .