Parking Brake Actuator: Service and Repair

Parking Brake Actuator Replacement
Caution: Refer to Brake Dust Caution.

Removal Procedure

1. Disable the park brake cable automatic adjuster.
2. Raise and support the vehicle.
3. Remove the tire and wheel assembly.
4. Remove the rotor.
5. Remove the axle shaft.
6. Remove the park brake shoe.




7. Remove the actuator (2) and rubber boot (1).

Installation Procedure




1. Install the rubber boot (1) and the actuator (2).
2. Install the park brake shoe.
3. Install the axle shaft.
4. Adjust the park brake shoe.
5. Install the rotor.
6. Install the tire and wheel assembly.
7. Remove the safety stands.
8. Lower vehicle.
9. Enable the park brake cable automatic adjuster.